Alumina Ceramic Heating Core Heating Element/Thermally Conductive Ceramic Customization
Alumina Ceramic Heating Core Heating Element/Thermally Conductive Ceramic Customization

Alumina Ceramic Heating Core Heating Element/Thermally Conductive Ceramic Customization

Product Specification: Product Introduction and Image: Alumina (Al2O3) Alumina can be produced in a wide range of puriti

Send your inquiry


Basic Info.
Model NO. KF-0505
Delivery 7-15 Days
Dimension Diameter: 13mm-178mm Height: 25mm
Max Working Temperature 1750 Degrees Celsius
Classification Heating Element
Formula Al2O3
Specification 35*20*15
Origin China
HS Code 6909110000
Production Capacity 5000 Pieccs Per Month
Product Description
Product Specification:
ItemRound Cylindrical Crucible
Product nameAlumina Ceramic Crucible
TypeIndustrial Ceramic
Processing ServiceMilling, Mixing, Molding, Sintering, Machining
Purity99% , 97%, 96%, 95%
Density3.9 g/cm3
Hardness9 Mohs Scale
Flexural Strength375 Mpa
Compressive Strength 2300 Mpa
Max Working Temperature1750 ºC
Thermal conductivity 25ºC (W/m.K)35 W/mk
Thermal Expansion 0-800ºC (10-6/ºC)7.6
Volume Resistivity 20ºC (Ω.cm3)>1014
Water AbsorptionNone
Chemical TestHot Concentrated Sulfuric Acid ,100ºC

Product Introduction and Image:
Alumina (Al2O3)
Alumina can be produced in a wide range of purities with additives designed to enhance its properties. Typical purities range from 90 to 99.9%
It can be injection molded, die pressed, isostatically pressed, slip cast, and extruded. Once fired and sintered, it can only be machined using diamond grinding methods. Advanced green and biscuit machining techniques allow more complex components to be manufactured using traditional machining methods. In addition, Alumina can be readily joined to metals or other ceramics using metalizing and brazing techniques.
Alumina can be machined in green, biscuit, or fully dense states. While in the green or biscuit form, it can be machined relatively easily into complex geometries. However, the sintering process that is required to fully densify the material causes the alumina body to shrink approximately 20%. This shrinkage means that it is impossible to hold very tight tolerances when machining alumina pre-sintering. In order to achieve very tight tolerances, the fully sintered material must be machined/ground with diamond tools. In this manufacturing process, a very precise diamond coated tool/wheel is used to abrade away the material until the desired form is created. Due to the inherit toughness and hardness of the material, this can be a time consuming and costly process.
KF specializes in tight tolerance and highly complex work. We have extensive in-house machining facilities, including 4th & 5th axis machining centers, drilling, grinding, milling, polishing, sawing, tapping, threading and turning. This allows us to manufacture Alumina components to the highest specifications.
1. Electronic components & substrates
2. High temperature electrical insulators
3. High voltage insulators
4. Laser tubes
5. Machine components
6. Mechanical seals
7. Precision shafts and axles in high wear environments
8. Roller and ball bearings
9. Seal rings
10. Semiconductor parts
11. Shot blast nozzles
12. Thermocouple tubes
13. Tap plates
14. Valve seats
15. Wear components
16. Wire and thread guides
17. Ballistic Armor

Company Profile:
Suzhou KF Advanced Materials Co., Ltd is a professional manufacturer engaged in the research , production and precision processing of advanced ceramic since 2016 . Our company has passed the standard of quality management system of IS09001:2015 and RoHS inspection. The series of ceramic products include zirconia , aluminia , aluminia nitride , silicon carbide , silicon nitride , mullite , boron nitride , magnesium oxide , capillary quartz tube and Macor machinable glass .

Based on our strong technical strength , dozens of high precision processing equipments and whole-process service , Suzhou KF is aimed at providing customers with high quality products , on- time delivery and excellent service all the time .
Welcome to contact with us and visit our factory , thank you !



Our Advantages:
1, We have rich experience for more than 12 years in ceramic industry; 2, We can both offer standard products and support customization; 3, We could offer high quality products with proper price; 4, We have strong research and development capability with 2 material science Phd team ;5, Exellent after-sales service always be offerd to our customers.
Q & A:Q: Are you a manufacturer?
A: Yes, we are real manufacturer and solution provider, we have our own factories and R& D laboratory. Q: Do you have any stock?
A: We have many stock for standard products, we can also develop individualized products upon your drawings. Q: What certificates and documents can you offer?
A: We have SGS & ISO 9001, also product testing report is available. If you need any other certificate, we will apply for it as per your request. Q: Why Should I choose you?
A: We could provide high quality products with proper price, and we will offer exellent after sales service too. Q: Can l get the best price from you?
A: Yes, we are manufacturer and have many our own factories, so we can control the cost and quality very well by ourselves. Q: Will you offer any free samples?
A: Yes, some free samples will be available, and it's better if you could accept freight collect.